The DXLP7 is the official firmware for the Samsung Galaxy S II in the Philippines and many are asking on how on to gain root access for this firmware and the good news is that Chainfire released the CF-Root DXLP7. Before LP7 users used the CF-Root DXLPQ and there are some issue so I will guide you on how to root DXLP7 using CF-Root.
Warning: Perform at your own risk, rooting could possibly brick your device and void your
warranty.
Prerequisite before rooting are as follows:
Back up your entire system this includes Contact, SMS, Call Logs, Apps, Music, Pictures etc. You can follow some back up procedure and tools, Here:
Warning: Perform at your own risk, rooting could possibly brick your device and void your
warranty.
Prerequisite before rooting are as follows:
Back up your entire system this includes Contact, SMS, Call Logs, Apps, Music, Pictures etc. You can follow some back up procedure and tools, Here:
Check your firmware: Settings > About Phone > Kernel Version e.g 2.6.35.7-I9100DXKL3-CL814816 (DX is the country code)
Rooting Requirements:
Download Odin: Here
Download CF-Root Kernel DXLP 7 ICS Firmware: Here
Samsung USB Driver Here: Here
Samsung USB Cable and your computer (Windows)
Read Chain Fire instruction: Here
Let the rooting begin:
Enable USB Debugging: Settings > Application Settings > Development > USB Debugging (checked)
Set your Phone to Download Mode: Power Off > Turn on by ‘Power + Volume Down + Home Key’
Run Odin as Adminstrator
2. Make sure that Auto-Reboot, F. Reset Time are checked
3.Push your downloaded ChainFire Kernel to PDA (CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar)
4.Hit – Start
5.Make sure you have Green Pass.
.jpg)
.jpg)
No comments:
Post a Comment